News & Events
Stay up to date with all of the latest industry and legislative news relating to the safety and maintenance of workplace equipment.
We will post blogs relating to HSE prosecutions and HSE accident statistics, safety initiatives and topical events relating to equipment safety and the consequences of failing to maintain equipment at work across a wide range of industries – from farming to construction, warehousing to transport and logistics. In addition we will highlight how our Good to Go Safety inspection systems could help to improve workplace safety and help your company to reduce maintenance costs while complying with key statutory legislations such as PUWER, LOLER and WAHR.
Why fleet and driver safety shouldn’t be a lottery
- Author Good to Go Safety
- 0
- 1141 Views
The HSE (Health and Safety Executive) have investigated an accident where a HGV driver suffered fatal chest injuries. The driver was unstrapping a load on the flatbed trailer, when the load (steel gates) fell and tragically crushed him. Andrew Bayley-Machin, 41, was fatally crushed after the steel gates fell approximately 10 ft from the trailer.
Do you play the National Lottery? Millions do and, every week, they buy a ticket in the hope of winning the jackpot. Yet the odds of doing that a...
HGV driver suffers fatal injuries
- Author Good to Go Safety
- 0
- 679 Views
The HSE (Health and Safety Executive) have investigated an accident where a HGV driver suffered fatal chest injuries. The driver was unstrapping a load on the flatbed trailer, when the load (steel gates) fell and tragically crushed him. Andrew Bayley-Machin, 41, was fatally crushed after the steel gates fell approximately 10 ft from the trailer.
The investigation by the HSE found that planning arrangements for restraining the load were inadequate. Heavy goods should be stable independent ...
The Most Common Forklift Accidents and How to Prevent Them
- Author Good to Go Safety
- 0
- 679 Views
Every year in the UK there are hundreds of serious injuries, including fatalities, to forklift truck operators and pedestrians, which could have been prevented if staff were properly trained and followed safe systems of work. Within the material handling industry alone, there are over 1,300 forklift truck accidents a year, which means on average there are five accidents every workday in the UK.
When we look at statistics from the United States, these numbers are even more staggering with ...
Factory and Warehousing Safety Tips
- Author Good to Go Safety
- 0
- 1368 Views
Factories and warehouses have numerous health and safety risks. If you fail to manage them, your business may face a number of different issues such as lost working days, injuries and in the worst case scenario, fatalities.
As an employer, you are legally required to implement and maintain procedures that minimise these risks. Safety measures must protect workers from factory and warehousing hazards and enable workers to carry out their jobs safely.
Maintaining good safety will not...
1,759 road casualties linked to vehicle defects last year
- Author Good to Go Safety
- 0
- 685 Views
Defective and poorly-maintained vehicles were linked to 1,759 road casualties recorded in 2021. Issues such as defective lights, worn tyres and ineffective brakes caused a 7% rise on the previous year.
The number of road casualties caused by defective / faulty vehicles in 2021 continued to be impacted by the UK restrictions following the coronavirus pandemic, including a period of lockdown in the first quarter of the year. There was a rise in casualty numbers compared to 2020, which was ...
Employee sustains extensive injuries after being dragged into machine
- Author Good to Go Safety
- 0
- 613 Views
An investigation by the Health and Safety Executive (HSE) found that a manufacturer of paper and cardboard (Amberset Limited) failed to regularly review safety measures on their machinery and equipment to ensure that access to hazardous parts was prevented. The HSE found that the safety of the paper rewinder had not been reviewed since August 1998.
If Amberset Limited had conducted safety inspections on their machinery and equipment they would have spotted that the paper rewinder was not ...
HSE inspections focussed on manufacturing sector
- Author Good to Go Safety
- 0
- 585 Views
The Health and Safety Executive (HSE) have started targeting the manufacturing sector in an effort to ensure employers have suitable arrangements in place to manage health and safety and ensure they comply with the COSHH (Control of Substances Hazardous to Health Regulations 2002).
Inspections will be carried out to ensure Local Exhaust Ventilation, Water Suppressors and PPE (Personal Protective Equipment) is in good working order. If any health and safety breaches are discovered, the HSE...
It's National Scaffolding Week
- Author Good to Go Safety
- 0
- 554 Views
In support of #ScaffWeek (26-30th Sept) Good to Go Safety are providing a discount on all online orders for Scaffolding products between 26-30th September 2022.
Good to Go Safety and TakeAIM provide products to ensure users / hirers can inspect and maintain their Scaffolding (along with limitless other equipment types).
Shockingly there were 90 RIDDOR accidents reported by NASC members during 2021. You only have to keep one eye on HSE reports to notice the regularity of accidents reg...
Maintaining Work Equipment
- Author Good to Go Safety
- 0
- 535 Views
Since January the 1st 2021 the rules and procedures regarding work place maintenance of machinery and equipment has changed. In order to ensure that work place machinery and equipment doesn't deteriorate to the extent that it may put people in harms way, employers are required by PUWER (The Provision and Use of Work Equipment Regulations 1998) to maintain it to a good standard.
Effective maintenance of work place machinery and equipment can not only help businesses meet the expectations o...
Rules and Procedures have changed
- Author Good to Go Safety
- 0
- 536 Views
Since January the 1st 2021 the rules and procedures regarding work place inspections has changed. PUWER (The Provision and Use of Work Equipment Regulations 1998) highlights the circumstances where an inspection is required to maintain a safe working environment.
PUWER specifies that workplace equipment requires inspection when:
1. Equipment requires installation - after installation, before first use and after reassembly.
2. Work equipment is subject to conditions that may cause deter...
Improve your inspection and maintenance process
- Author Good to Go Safety
- 0
- 1555 Views
Inspections and maintenance of workplace equipment such as forklifts, ladders, pallet trucks, racking etc is a vitally important process to ensure equipment remains in a safe condition. Now we've made keeping track of maintenance and inspection schedules even easier with our range of inspection and maintenance stations. You can ensure your employees have access to their pre-use equipment checklists at all times by providing them with a central location to store their checklists.
When employee...
TakeAIM Updates
- Author Good to Go Safety
- 0
- 427 Views
As more and more customers sign up to TakeAIM and discover the benefits it can bring, so we receive more requests and suggestions for additional features to enhance the system.
Over the past 12 months we have been asked for a number of improvements to the dashboard area and we are delighted to announce that the following updates are now live and available for you to check out– just sign in to your dashboard to access the updates:
Following the latest updates you can now see the list of overd...
Why You Should Inspect Telehandlers
- Author Good to Go Safety
- 0
- 743 Views
A fencing manufacturer and the owner of the yard where the business operates, have been fined following the death of an employee at the site.
North Somerset Magistrates’ Court heard how on 14 August 2017, Roderick McKenzie Hopes was working for PA Fencing Ltd. A telehandler tipped and knocked over stacked timber which fell on to Mr Hopes resulting in his death.
An investigation by the Health and Safety Executive (HSE) found that the telehandler’s safety device, designed to stop loads being...
4 Million Inspection Checklists Sold
- Author Good to Go Safety
- 0
- 3814 Views
To date, Good to Go Safety have supplied over 4 million checklists to companies around the UK.
If you don’t currently know about our multi-award winning inspection systems, you may be wondering why so many people insist on utilising Good to Go Safety rather than simply printing their own checklists in-house? The answers are numerous ….
1. Safety First
From a safety perspective, there is a requirement under PUWER (Provision and Use of Work Equipment Regulations), LOLER (Lifting Operation...
Managing Warehouse Equipment
- Author Good to Go Safety
- 0
- 1409 Views
Thorough inspections of all equipment are required under Health and Safety law: LOLER 1998 & PUWER 1998
Asking employees to conduct pre-use checks before using forklifts, pallet trucks, racking, ladders or other warehouse equipment is not only a smart and responsible policy to enforce, but is also required by law. With our easy-to-use walk-through checklists it only takes a short time to ensure that warehouse equipment is safe to use.
Not only will it ensure equipment is safe to use but it...
Snow to hit Britain with -5C chill on the way
- Author Good to Go Safety
- 0
- 443 Views
Freezing temperatures and snow has being warned on the lead up to Christmas. The Met Office has said that the UK can expect snow and icy conditions from December 19th.
Weather maps from WXCharts show a freezing weather system hitting the UK from the 19th December due to air moving south from the Arctic and Scandinavia. The charts also suggest snow will fall across Scotland on the 16th and 17th December.
The Met Office also warned that the long term forecast will likely include extensive fr...
HSE inspection campaign sheds light on health and safety issues
- Author Good to Go Safety
- 0
- 586 Views
Last week 22 inspectors from HSE’s Yorkshire and North East Field Operations teams inspected 71 businesses in the Sheffield and Rotherham area. Of those visited 46 companies needed to make improvements to better protect the health, safety and wellbeing of workers in metal fabrication, engineering, general manufacturing and waste and recycling sectors.
During the course of the week, inspectors served three prohibition notices and 31 improvement notices. Examples of some of the breaches found i...