Our range of safety posters have been designed to reinforce the importance of completing pre-use safety inspections when fitted in the perfect location, act as an additional visual reminder for all your employees.
These posters provide a strong visual reminder, showing employees not only what they should be looking for during a pre-use safety inspection but also highlighting the components included in the Good to Go Safety inspection checklists.
Each posters is produced on tough, durable, wipe-clean synthetic paper, making them suitable for both internal and external use. You can display these posters in even the harshest of environments and roll them up for storage purposes without them tearing or delaminating. Hang easily using pins, tape, adhesive or inside a poster frames.
A perfect addition to your safe equipment management systems.
Our pallet truck safety poster has been designed to highlight key components of pallet trucks and reinforce the importance of completing pallet truck ..
Our dumper truck safety poster has been designed to highlight key components of a tipper truck and reinforces the importance of completing inspections..
Our excavator safety poster has been designed to highlight key components of excavator and reinforce the importance of completing inspections. This po..
The information station will provide your workplace with the ideal central location to store inspection check books and keep track of maintenance sche..
The information station will provide your workplace with the ideal central location to store inspection check books and keep track of maintenance sche..
The information station will provide your workplace with the ideal central location to store inspection check books and keep track of maintenance sche..
The information station will provide your workplace with the ideal central location to store inspection check books and keep track of maintenance sche..
The information station will provide your workplace with the ideal central location to store inspection check books and keep track of maintenance sche..
Our podium step safety poster has been designed to highlight key components of a podium step ladder and reinforce the importance of completing podium ..
The information station will provide your workplace with the ideal central location to store inspection check books and keep track of maintenance sche..
Our racking safety poster has been designed to highlight key components of pallet racking and reinforce the importance of completing racking inspectio..
Our scaffolding poster has been designed to highlight key components of fixec scaffolding and reinforce the importance of completing inspections. This..
Our forklift truck safety poster has been designed to highlight key components of forklift trucks and reinforce the importance of completing forklift ..
Our scaffold tower safety poster has been designed to highlight key components of scaffold towers and reinforce the importance of completing inspectio..
Our forklift work platform poster has been designed to highlight key components of forklift work platforms and reinforce the importance of completing ..
Our front loader (shovel loader) poster has been designed to highlight key components of front loader and reinforce the importance of completing inspe..
Our straddle carrier safety poster has been designed to highlight key components of a straddle carrier and reinforce the importance of completing stra..
Our harness safety poster has been designed to highlight key components of a harness and reinforces the importance of completing harness inspections. ..
Our tractor safety poster has been designed to highlight key components of tractors and reinforce the importance of completing tractors inspections. T..
Our ladder safety poster has been designed to highlight key components of ladder and reinforce the importance of completing ladder inspections. This l..
Forklift truck inspections can increase productivity by up to 25%. Additionally it will reduce breakdowns by 70% and lowers forklift truck maintenance costs by 25%.
Depending on the type of forklift truck, costs and technical sophistication, a broad spectrum of maintenance strategies should be applied. A faulty forklift truck may significantly slow or completely halt your entire production process. Poor maintenance strategies can reduce the overall productive capacity of a warehouse by 5...CONTINUE...
Capital Karts in Barking, East London has been fined almost £120,000 after an incident on the 6th August 2021.
Newham youth group organised a fun filled day at Capital Karts with a group of teens, however the day turned to horror when one of the teens had to be resuscitated at the venue after her hijab (a traditional muslim headscarf) got caught in a go karts drive axle.
Ruwaida Adan, 15, died in hospital of hypoxic brain injury and asphyxiation four days after she visited Capital ...CONTINUE...
A food manufacturing company has been fined following a serious incident at its premises in Wirral.
Sharon Bramhall had been supervising four members of staff as they completed high-level cleaning tasks during a night shift on the 22nd April 2022. She had been acting as a "banksman" as the MEWP turned at a right angle into the warehouse and struck Sharon, crushing her left leg.
The 58-year-old had to have her left leg amputated below the knee following a incident at Baker & Baker Products ...CONTINUE...
TakeAIM are proud to announce that the easter bunny has begun using TakeAIM.
Santa Claus contacted the easter bunny after they had success in the north pole using TakeAIM. Santa's team used the system to assess toy quality and inspect Santas sleigh prior to flight. Santa encouraged the Easter Bunny to try TakeAIM and we can now confirm they are using it in the run up to Easter.
The easter bunny is able to assess, inspect and manage their eggs with TakeAIM! They're able to check th...CONTINUE...
An investigation was conducted by the Health and Safety Executive (HSE) following the death of a sub-contractor hired by NG Bailey Limited.
Alistair Hutton, lost his life whilst working on a mobile elevating work platform (MEWP) along an unfinished corridor of the Baird Family Hospital in Aberdeen on 18 January 2023.
The 51-year-old immediately lost consciousness, when his head struck a metal lintel. Mr Hutton, who lived in Forfar, was pronounced dead less than an hour after the i...CONTINUE...
A company in Kent has been fined after an accident occurred at a construction site of six houses on Smarden Road in Headcorn, Kent.
A sub-contractor, had been installing vertical hanging tiles on one of the new properties when he fell 1.8 metres through an unguarded opening in scaffolding and landed on the ground below. The accident happened on the 5th July 2017 and resulted in Mark Tolley sustaining several broken ribs and serious internal injuries including a punctured lung. He later di...CONTINUE...
A manufacturing company (Mifflin Construction Ltd manufacture and install steel components for the construction industry) has been fined £120,000 after a employee was fatally injured in the Leominster workshop.
Steve Rooke, 55, an employee of over 27 years, sadly lost his life when a steal beam he was moving rotated and toppled over. The beam which was 18 metres long and weighed 1,800Kg trapped him against another beam causing fatal injuries.
Karen Rooke, Steve’s wife said: "It’s c...CONTINUE...
A 46-year-old worker was crushed to death by two granite slabs whilst working for Graniteland Limited at the company’s Lyde Green site in Halesowen.
An investigation by the HSE (Health and Safety Executive) found that the incident which occurred on the 30th November 2020 could have been avoided with the correct training and maintenance procedures.
The investigation found that Robert Czachracz, who was from Poland, had been moving the granite slabs onto storage racks, using an over...CONTINUE...
A woman's right arm has been severed after becoming trapped in machinery whilst working for F.J Church and Sons Ltd, a metal recycling company in Rainham, Essex.
An investigation by the HSE (Health and Safety Executive) followed the incident, which happened on the 12th June 2021. The investigation found that incident occurred after Ms Troia attempted to remove a blockage by reaching through an unguarded rotary valve of a catalytic converter sampling machine.
Ms Troia, the victim was...CONTINUE...
An investigation has been launched after scaffolding succumbed to 60mph winds during Storm Henk. The scaffold tower collapsed onto a busy high street on Tuesday the 2nd January 2024.
Sutton Council where the collapse happened took quick action to ensure the high street was made safe whilst the police, Sutton council and the scaffolding company investigated the incident to determine the root cause of the collapse. The scaffolding was then cleared to ensure businesses were able to continue ...CONTINUE...
Atlantic Recycling Limited (a recycling company) has been fined £300,000 after a father-of-two was killed by a shovel loader.
Anthony Bilton, from Barry, Vale of Glamorgan, was fatally injured on 4 September 2019 when he was run over by a shovel loader whilst working on site in Cardiff, Wales.
The 59-year-old was walking across a wood processing yard in order to undertake routine maintenance tasks when the tragic accident happened.
The HSE (Health and Safety Executive) inves...CONTINUE...
An engineering firm in Perth has been fined £10,000 after an employee lost his little and ring finger.
The worker, employed by Edwards Engineering (Perth) Limited, had been carrying out maintenance work on a grain dryer at East of Scotland Farmers on 28 June 2020.
He inadvertently placed his hand into the blades of an unguarded rotary fan in the grain dryer. The fan was rotating at 1200 revolutions per minute when it came into contact with the worker’s hand. He was off work for sev...CONTINUE...
A textiles company has been fined £60,000 after an employee suffered serious injuries their right arm in an incident at a factory operated by Pin Croft Dyeing and Printing Co. Limited in Market Street, Adlington, on 20 June 2022.
An investigation by the Health and Safety Executive (HSE) found the employee had been operating a large fabric spooling machine when the brake malfunctioned. During an attempt to manually slow the rotation of the machine, he broke both major bones in his forearm ...CONTINUE...
A 35-year-old man from Caernarfon fell approximately 2.44 metres from a Mobile Elevating Work Platform (MEWP) whilst he was working for Aspire Park and Leisure Homes Ltd (a manufacturer of leisure lodges and park homes) on the 6th January 2022.
The end gate of the Mobile Elevating Work Platform (MEWP) was taped open whilst two employees were raised into the air to spray insulating foam into a lodge wall.
The injured worker broke nine ribs, forearm and suffered a kidney laceration...CONTINUE...
Show your Forklift Trucks some love on Valentines Day (and forever) - Give them quick pre-drive inspections to make sure they're doing ok ❤️
Monitoring all your forklifts and assessing their environments with regular (pre-use / pre-move) forklift safety inspections will help achieve a safer workplace environment for employees. Pre-use / pre-move forklift checklists will not only increase the likelihood of spotting a fault early before it deteriorates further, but it also provides employees ...CONTINUE...
A North Yorkshire construction company has been fined after a worker was struck on the head and killed by a 16-ton excavator.
On 13 January 2021, Dean Myers, an employee of HACS Construction Ltd, was undertaking groundwork activities in a partially excavated trench at a site in Ripon, North Yorkshire.
During the works, the 56-year-old was struck on the head by the moving bucket of the excavator suffering catastrophic injuries to his face and head. He was pronounced dead at the scene ...CONTINUE...
0
522
Can't find the check book you require?
Inspect all your workplace assets on your mobile with Good to Go Safety's app - TakeAIM. TakeAIM enables you to create your own check lists meaning that no matter how unusual your
asset is, you can inspect and monitor it using TakeAIM. Spot re-occurring issues using the dashboard and help resolve equipment faults with the maintenance log.
TakeAIM helps company remain in line with important Health & Safety regulations (such as PUWER, WAHR) and is the perfect solution whether you require daily, weekly, monthly or ad-hoc inspections.
Simply register for a 7 day free trial, download the app and start adding your assets to the system.