News & Events

News & Events

Stay up to date with all of the latest industry and legislative news relating to the safety and maintenance of workplace equipment.

We will post blogs relating to HSE prosecutions and HSE accident statistics, safety initiatives and topical events relating to equipment safety and the consequences of failing to maintain equipment at work across a wide range of industries – from farming to construction, warehousing to transport and logistics. In addition we will highlight how our Good to Go Safety inspection systems could help to improve workplace safety and help your company to reduce maintenance costs while complying with key statutory legislations such as PUWER, LOLER and WAHR.

Construction firm fined after worker dies from fall
Construction firm fined after worker dies from fall
  • 0
  • 1400 Views
A company in Kent has been fined after an accident occurred at a construction site of six houses on Smarden Road in Headcorn, Kent. A sub-contractor, had been installing vertical hanging tiles on one of the new properties when he fell 1.8 metres through an unguarded opening in scaffolding and landed on the ground below. The accident happened on the 5th July 2017 and resulted in Mark Tolley sustaining several broken ribs and serious internal injuries including a punctured lung. He later di...


Tyre tread statistics
Tyre tread statistics
  • 0
  • 856 Views
A fascinating report courtesy of TyreSafe Admin National Highways Imperial College London looking at tread depth survey at the point of tyre replacement. The 2023 findings show an overall reduction in the number of illegal and borderline tyres at the point of replacement compared to 2016 but 16.7% of tyres were below the legal limit when replaced. The 2023 findings confirm the number of illegal tyres on Britain’s roads annually is potentially as many as nearly one-in-four vehicles – at just over...


A Roadworthiness challenge for Fleet Managers
A Roadworthiness challenge for Fleet Managers
  • 0
  • 1160 Views
A recent global report generated from Good to Go Safety’s TakeAIM pre-use checking app, showed that one in a hundred fleet vehicles had a fault so serious that the vehicle had to be immediately removed from service until fixed. Had these vehicles been driven, it could have resulted in a breakdown and/or a collision. There are 5.4 million fleet assets on British roads. If that 1% of vehicles which were not roadworthy is extrapolated to the whole fleet, this means 54,000 fleet vehicles on any g...


HSE clamps down on fairground rides
HSE clamps down on fairground rides
  • 0
  • 891 Views
Starting on 24 April, the HSE (The Health and Safety Executive) will carry out 100 targeted inspections of fairground and theme park rides following a string of incidents throughout the UK. The campaign's strategy is to promote the safe use of fairground rides and inflatable devices and reduce the risk of catastrophic incidents. The campaign is targeted at both theme park sites and travelling fairgrounds and is set to finish by September 2023. It wasn't long ago that we wrote about an inciden...


Fleet management – a guide to who, what, why and how
Fleet management – a guide to who, what, why and how
  • 0
  • 914 Views
Anyone involved with driving for work or for the management of fleet vehicles should find our latest guide of interest as it highlights ways for businesses to improve vehicle inspections and management. This TakeAIM guide provides useful advice on getting the most out of your fleet and covers many of the key questions and considerations that management may come across. We look at key legislation, industry statistics, grey fleet issues, and driver concerns as we aim to deliver the answers and ...


Sometimes it's "Good to Go" around in Circles
Sometimes it's "Good to Go" around in Circles
  • 0
  • 1012 Views
It’s not always obvious where to start with managing driver risk. After all, there are so many different areas that need to be tackled. And how do we know whether what we’re doing is good or bad, or whether we have any glaring gaps. It’s easy to feel like we’re just going round in circles. There is a simple process that can help you, based around four easy-to-understand steps: 1. Benchmarking – Do I need to improve? 2. Gap Analysis – If I need to improve, where do I start? 3. Action – How ...


Showing 1 to 6 of 6 (1 Pages)