A motorsport engineering firm based in Kent has been fined after Britain’s workplace regulator identified numerous health and safety breaches. Inspectors from the Health and Safety Executive (HSE) visited Hispec Motorsport Limited - a specialist designer and producer of aftermarket brake upgrades for road, race, track, and kit cars. During their visits, the inspectors found serious breaches of the law and enforcement notices were issued. The subsequent investigation found the business had not maintained work equipment and staff were seen operating Computer Numerical Control (CNC) machines with safety panels removed allowing access to dangerous moving parts. A high voltage panel..

On 30 October 2019, Niall McCormack from Kettering, Northamptonshire had been working with another carpenter at a new build construction site in Alconbury Weald, Cambridgeshire. The pair were removing trusses from a pack, to then spread and install across there building. As they were in the process of spreading, a gust of wind caught a spandrel panel, pushing it against the remaining trusses in the pack. Both the truss pack and spandrel panel fell into the work area, hitting Niall McCormack. An investigation conducted by the HSE (Health and Safety Executive) following the tragedy found that KM Carpentry Contractors Limited had failed to identify the risk and effect the wind cou..

The Health and Safety Executive (HSE) conducted an investigation after an employee of Dnata Ltd was crushed to death at London Heathrow Airport on the 23rd February 2022. The incident occurred during the unloading of baggage containers from an Emirates Airbus which had arrived from Dubai. The employee walked underneath a high loader (a raised platform similar to a scissor lift) in order to access the other side of a trailer. At the same time the high-loader operator lowered one of its two hydraulically operated platforms, which trapped then fatally crushed the employee. A spindle locking mechanism used to secure containers onto the baggage trailer was broken at the time of the..

Forklift truck inspections can increase productivity by up to 25%. Additionally it will reduce breakdowns by 70% and lowers forklift truck maintenance costs by 25%. Depending on the type of forklift truck, costs and technical sophistication, a broad spectrum of maintenance strategies should be applied. A faulty forklift truck may significantly slow or completely halt your entire production process. Poor maintenance strategies can reduce the overall productive capacity of a warehouse by 5 to 20 percent. “Predictive maintenance increases equipment uptime by 10 to 20% while reducing overall maintenance costs by 5 to 10% and maintenance planning time by 20 to 50%" Why Preve..

Capital Karts in Barking, East London has been fined almost £120,000 after an incident on the 6th August 2021. Newham youth group organised a fun filled day at Capital Karts with a group of teens, however the day turned to horror when one of the teens had to be resuscitated at the venue after her hijab (a traditional muslim headscarf) got caught in a go karts drive axle. Ruwaida Adan, 15, died in hospital of hypoxic brain injury and asphyxiation four days after she visited Capital Karts in Barking, east London, she was described by her mother as a "beacon of kindness" with the "sweetest soul". An investigation by Barking and Dagenham Council found that Capital Karts fail..

A food manufacturing company has been fined following a serious incident at its premises in Wirral. Sharon Bramhall had been supervising four members of staff as they completed high-level cleaning tasks during a night shift on the 22nd April 2022. She had been acting as a "banksman" as the MEWP turned at a right angle into the warehouse and struck Sharon, crushing her left leg. The 58-year-old had to have her left leg amputated below the knee following a incident at Baker & Baker Products on Stadium Road, but said that she felt "lucky" and stated "I know i could have died". An investigation by the Health and Safety Executive (HSE) revealed a series of failings by Baker & Baker Produ..

TakeAIM are proud to announce that the easter bunny has begun using TakeAIM. Santa Claus contacted the easter bunny after they had success in the north pole using TakeAIM. Santa's team used the system to assess toy quality and inspect Santas sleigh prior to flight. Santa encouraged the Easter Bunny to try TakeAIM and we can now confirm they are using it in the run up to Easter. The easter bunny is able to assess, inspect and manage their eggs with TakeAIM! They're able to check their eggs are of egg-cellent quality prior to drop off...

An investigation was conducted by the Health and Safety Executive (HSE) following the death of a sub-contractor hired by NG Bailey Limited. Alistair Hutton, lost his life whilst working on a mobile elevating work platform (MEWP) along an unfinished corridor of the Baird Family Hospital in Aberdeen on 18 January 2023. The 51-year-old immediately lost consciousness, when his head struck a metal lintel. Mr Hutton, who lived in Forfar, was pronounced dead less than an hour after the incident. The investigation by Health and Safety Executive found NG Bailey Limited, the lead contractor for the project, had failed to consider overhead obstructions, especially during the trans..

A company in Kent has been fined after an accident occurred at a construction site of six houses on Smarden Road in Headcorn, Kent. A sub-contractor, had been installing vertical hanging tiles on one of the new properties when he fell 1.8 metres through an unguarded opening in scaffolding and landed on the ground below. The accident happened on the 5th July 2017 and resulted in Mark Tolley sustaining several broken ribs and serious internal injuries including a punctured lung. He later died on 13 July 2017. An investigation by the Health and Safety Executive (HSE) has found that Amberley Homes (Kent) Ltd, a construction company in Kent, did not control the construction site eff..

A manufacturing company (Mifflin Construction Ltd manufacture and install steel components for the construction industry) has been fined £120,000 after a employee was fatally injured in the Leominster workshop. Steve Rooke, 55, an employee of over 27 years, sadly lost his life when a steal beam he was moving rotated and toppled over. The beam which was 18 metres long and weighed 1,800Kg trapped him against another beam causing fatal injuries. Karen Rooke, Steve’s wife said: "It’s changed everything, every plan we had has gone and our future is cancelled. I’ve lost a husband and the girls have lost a loving dad. He'll miss out on so many things like becoming a grandparent.” ..

A 46-year-old worker was crushed to death by two granite slabs whilst working for Graniteland Limited at the company’s Lyde Green site in Halesowen. An investigation by the HSE (Health and Safety Executive) found that the incident which occurred on the 30th November 2020 could have been avoided with the correct training and maintenance procedures. The investigation found that Robert Czachracz, who was from Poland, had been moving the granite slabs onto storage racks, using an overhead crane when two of the slabs, each weighing a quarter of a tonne, fell and fatally crushed Mr Czachracz against a forklift truck. The HSE found that Graniteland Limited and its director, Mr..

A woman's right arm has been severed after becoming trapped in machinery whilst working for F.J Church and Sons Ltd, a metal recycling company in Rainham, Essex. An investigation by the HSE (Health and Safety Executive) followed the incident, which happened on the 12th June 2021. The investigation found that incident occurred after Ms Troia attempted to remove a blockage by reaching through an unguarded rotary valve of a catalytic converter sampling machine. Ms Troia, the victim was rushed to hospital after the rotary valve closed, trapping and severing her arm. She has been unable to work since. The HSE found that F.J. Church and Sons failed to prevent workers accessing..

An investigation has been launched after scaffolding succumbed to 60mph winds during Storm Henk. The scaffold tower collapsed onto a busy high street on Tuesday the 2nd January 2024. Sutton Council where the collapse happened took quick action to ensure the high street was made safe whilst the police, Sutton council and the scaffolding company investigated the incident to determine the root cause of the collapse. The scaffolding was then cleared to ensure businesses were able to continue trading. The incident was reported to the Health and Safety Executive (HSE) who will carry out a thorough investigate in order to prevent similar accidents in the future. The investigation will..

Atlantic Recycling Limited (a recycling company) has been fined £300,000 after a father-of-two was killed by a shovel loader. Anthony Bilton, from Barry, Vale of Glamorgan, was fatally injured on 4 September 2019 when he was run over by a shovel loader whilst working on site in Cardiff, Wales. The 59-year-old was walking across a wood processing yard in order to undertake routine maintenance tasks when the tragic accident happened. The HSE (Health and Safety Executive) investigation found that although a risk assessment had been produced prior to the work commencing, it was not suitable nor sufficient and did not include work taking place in the wood yard. Additionally, ..

An engineering firm in Perth has been fined £10,000 after an employee lost his little and ring finger. The worker, employed by Edwards Engineering (Perth) Limited, had been carrying out maintenance work on a grain dryer at East of Scotland Farmers on 28 June 2020. He inadvertently placed his hand into the blades of an unguarded rotary fan in the grain dryer. The fan was rotating at 1200 revolutions per minute when it came into contact with the worker’s hand. He was off work for seven weeks following the incident. A Health and Safety Executive (HSE) investigation into this incident found Edwards Engineering (Perth) Limited had failed to risk assess the task that the emplo..