MEWP Inspections - Workplace Inspection Checklists

Reports from seven countries shows 10 fatalities and 66 injuries in 2021.

In the past three years there were 124 reports from 12 countries, including 23 fatalities – almost double (91.7%) the ten-year yearly average.

Over the past 10 years there have been 39 deaths due to mechanical or technical MEWP failures alone.Mobile Elevated Work Platforms (MEWPs) are commonly used across all industrial sectors by a whole variety of trades, including mechanical and electrical contractors, and painters and decorators, as a safer, temporary method of working at height. The industry sector with the most fatalities was construction, accounting for just over half of all fatalities, while arboriculture accounted for 20.5%. There is a large range of MEWPs on the market and their controls and functionality varies depending on the category, manufacturer, model and size of machine. Types of MEWP can often be referred to as scissor lifts, articulating booms, telescopic booms and/or cherry pickers (amongst others).

Mobile Elevating Work Platform

Data collated by IPAF (The International Powered Access Federation) from 2012-2021 indicates 4,374 reports, including 4,462 lost-time incidents (LTIs) of which there were 585 fatalities. There have been 41 countries from which reports have been gathered across the whole ten-year period. In 2021 alone, there were 603 reports from 28 countries, with 628 people involved in these incidents, which resulted in 109 fatalities.

One way to reduce the likelihood of a mechanical or technical failure is to carry out regular inspections of the equipment by qualified personnel. Failure to carry out inspections and ongoing maintenance can result in mechanical or technical failures. There are different types of inspections that must be carried out on a MEWP: Pre-hire inspections carried out by MEWP rental companies; pre-use inspections by an operator; periodic maintenance inspection by a qualified engineer/technician; routine and non-routine maintenance carried out by the rental company; major inspections carried out by a qualified engineer/technician; Original Equipment Manufacturer (OEM) service instructions and safety bulletins implementation; mandatory parts replacement by a qualified engineer/technician.

It is imperative MEWP inspections are carried out – complacency will lead to incidents and accidents occurring, this can be prevented by carrying out pre-use and periodical inspections. MEWPs that are regularly inspected are less likely to be subject to mechanical or technical failures.

A mobile elevating work platform (MEWP) must be inspected daily or at the start of each shift to make sure it is: Safe to use; and will not cause an injury to the platform occupants or other personnel. Your employer must provide you with adequate training to enable you to operate the equipment safely and be aware of any associated risks. You must record evidence of the daily pre-use inspection.

Before carrying out a pre-use inspection you must: 1. Ensure you are trained in the category of MEWP about to be used;
2. Ensure you are familiarised on the specific model.

Before carrying out a pre-use inspection you must: 1. Isolate the machine;
2. Tag the equipment to also inform other potential operators in the area that the machine has a fault; and
3. Report the fault to your employer and the MEWP owner.

The IPAF GLOBAL SAFETY REPORT 2022 contains a detailed breakdown of accident data and statistics relating to MEWPs and is a recommended reference point for anyone involved with the operation of MEWPs. Click here for more information.

The Good to Go Safety MEWP safety inspection checklist helps companies comply with PUWER, LOLER, WAHR, CDM, IPAF & HSE legislation and best practice. The highly visible tag can be positioned by the point of entry to remind operatives to carry out a pre-use MEWP safety inspection checklist and to advise of the findings of said MEWP safety inspection. The MEWP safety inspections checklist is used to carry out essential visual checks of the MEWP to help highlight any potential issues and to identify when it is good to go. This essential MEWP safety inspection checklist can be used in conjunction with the MEWP manufacturer's manual.

IPAF recommends the MEWP should be inspected both before and after use to ensure it is safe, complete, working properly and clean. The guidelines and MEWP safety inspection checklist supplied by Good to Go Safety are a perfect supplement to the instructions and training already given to operatives. If a safety problem is identified, or any uncertainties are raised with the MEWP safety inspection checklist, the status display should be immediately updated to “DO NOT USE” whilst advice is sought from the site manager, supervisor or safety officer.

By placing a completed checklist inside the Good to Go Safety Status Tag it provides a clear visual confirmation of the date of inspection and the findings, removing any unfounded risk of assumption that the inspection has been completed. A duplicate record is left inside the check book for management records.

Useful downloads can be found in Legislation & Regulation. BS EN 365:2004 and BS 8437 also contain information on periodic safety inspection of fall protection.


MEWP Inspection Books - 25 Checklists

MEWP Inspection Books - 25 Checklists

Improve workplace safety and reduce maintenance costs on your MEWPs by carrying out safety inspections. A mobile elevating work platform (MEWP) must b..

£6.20

MEWP Inspections - Weekly Checklist Kit

MEWP Inspections - Weekly Checklist Kit

Improve workplace safety and reduce maintenance costs on your MEWPs by carrying out safety inspections. A mobile elevating work platform (MEWP) must b..

£37.10

MEWP Inspections - Daily Checklist Kit

MEWP Inspections - Daily Checklist Kit

Improve workplace safety and reduce maintenance costs on your MEWPs by carrying out safety inspections. A mobile elevating work platform (MEWP) must b..

£109.50

MEWP Inspection and Maintenance Station

MEWP Inspection and Maintenance Station

The information station will provide your workplace with the ideal central location to store inspection check books and keep track of maintenance sche..

£233.20

MEWP Poster - Visual Inspection Checklist

MEWP Poster - Visual Inspection Checklist

Our Mobile Elevating Work Platform (MEWP / Scissor Lift / Boom) safety poster has been designed to highlight key components of MEWP and reinforce the ..

£21.77

Inspection Wallet and Pen

Inspection Wallet and Pen

A handy wallet that not only provides additional protection from the elements but also gives inspectors a solid writing surface to complete inspection..

£6.20

Weather Resistant Inspection Holder

Weather Resistant Inspection Holder

These industrial strength pockets have a press seal fastening to keep important documents clean and dry. An ideal solution for storing check books, in..

£6.31

Inspection Book Dispenser

Inspection Book Dispenser

Allow the storage of checklists in a central location for quick and easy access to important inspection checklists. Provide workers with the ideal ..

£13.25

Showing 1 to 8 of 8 (1 Pages)

News

Recycling company fined after worker loses leg

Recycling company fined after worker loses leg

An investigation was carried out by the Health and Safety Executive (HSE) following a gruesome incident which was so severe that an employee had to have his leg amputated above the knee. The incident occurred on the 5th of October 2022, whilst employees were sorting out refuse at the Pink Skips (NW) Ltd site at Levenshulme. CCTV footage provided the HSE investigators with key knowledge about the incident. When reviewed, it showed employees working around and in close proximity to a 360° ro...CONTINUE...

Work-related fatalities in the UK 2023/24

Work-related fatalities in the UK 2023/24

The Health and Safety Executive (HSE) have released the 2023/24 statistics for UK work-related fatal injuries and according to these statistics, there were 138 deaths across all UK workplaces in 2023–24 with the construction industry accounting for more than a third of the total with 51 fatalities. The new figures, which can be found here, show that the annual number of work-related fatalities has remained broadly similar for over a decade. Additionally, as per previous years, male workers co...CONTINUE...

Company and director fined after a catalogue of serious injuries

Company and director fined after a catalogue of serious injuries

The Health and Safety Executive (HSE) conducted an investigation following an incident at Code-A-Weld, Harfreys Industrial Estate, Great Yarmouth on the 19th November 2022. A man (54 years) was airlifted to hospital and placed into an induced coma after being struck by an object whilst manufacturing steel cable drums for the offshore industry. During the manufacturing process, the jacking set-up failed, causing parts to strike the man in the face. This caused extremely serious injuries in...CONTINUE...

When did you last check your car?

When did you last check your car?

2% OF ALL ROAD TRAFFIC ACCIDENTS CAN BE ATTRIBUTED TO VEHICLE DEFECTS AND FAULTS Given that the National average age of UK vehicles is 8 years, it's no surprise that faults such as tyre blow outs, broken lights and smearing window wipers are causing accidents across the UK. ONLY 44% OF PEOPLE INSPECT THEIR CAR PRIOR TO TRAVELLING FOR WORK.. and of that 44% who do complete checks... • 30% don't check their oil levels • 42% have a warning light on their dashboard • 57% ...CONTINUE...

Man spared jail for unsafe work on own home

Man spared jail for unsafe work on own home

The Health and Safety Executive (HSE) conducted a thorough investigation following a site visit to a property where a man was carrying out unsafe work on his home in Manchester. The HSE served enforcement notices to put work to an immediate stop in August 2020. During their initial visit, the Health and Safety Executive found that Abdul Rehman had engaged operatives to help him build an extension to the property on Kings Crescent in Old Trafford. At the property there was an extremely uns...CONTINUE...

Worker drowns and loses life two days later

Worker drowns and loses life two days later

A Health and Safety Executive (HSE) investigation was carried out after the death of a construction worker. Gary Webster, a 60-year-old man was repeatedly pulled under water after his boat capsized during routine cleaning of the River Aire. Mr Webster and another worker (who managed to swim to safety) had been removing debris at the bottom of the weir gates at Knostrop Weir. The accident occured when the boat they were using was pulled into churning water due to the considerable rush of w...CONTINUE...

Managing workplace hazards

Managing workplace hazards

Managing hazards in a business is fundamental to maintaining the safety of employees. Under UK law, employers have a duty of care to ensure the health, safety, and wellbeing of all employees. This means it’s an employer’s responsibility to identify the hazards facing their employees and implement measures to mitigate them. It's fairly common for employees (and in many cases, management) to be unaware of the hazards they face regularly. Those who haven't encountered an accident often feel ...CONTINUE...

Workplace Equipment Inspections - Construction - Farming - Warehousing

Workplace Equipment Inspections - Construction - Farming - Warehousing

Numerous health and safety accidents or incidents occur every day due to equipment being used in the workplace that is improperly managed, maintained or is not made for the intended purpose. Industries such as farming and agriculture, factories, warehouses and construction are all high risk due to numerous equipment types being used daily. Employers are required to ensure that all the workplace equipment provided to employees is regularly inspected and maintained in safe working order. Th...CONTINUE...

Forklift Engineer Seriously Injured during forklift servicing

Forklift Engineer Seriously Injured during forklift servicing

A 47-year-old grandfather sustained multiple fractured vertebrae on the 14th November 2019 at a Pirelli Tyres' factory in Carlisle. The forklift truck engineer was in the process of servicing a truck when two metal skips fell from a stack of waste tyres, crushing Mr Weightman against the ground. A HSE investigation found that in order for Mr Weightman to work on the forklift truck, he had to move the truck. He was however, unaware that the truck was positioned to stabilise the skips. This...CONTINUE...

Motorsport engineering firm fined following HSE inspection

Motorsport engineering firm fined following HSE inspection

A motorsport engineering firm based in Kent has been fined after Britain’s workplace regulator identified numerous health and safety breaches. Inspectors from the Health and Safety Executive (HSE) visited Hispec Motorsport Limited - a specialist designer and producer of aftermarket brake upgrades for road, race, track, and kit cars. During their visits, the inspectors found serious breaches of the law and enforcement notices were issued. The subsequent investigation found the busin...CONTINUE...

22-year-old carpenter sustains fatal head injury

22-year-old carpenter sustains fatal head injury

On 30 October 2019, Niall McCormack from Kettering, Northamptonshire had been working with another carpenter at a new build construction site in Alconbury Weald, Cambridgeshire. The pair were removing trusses from a pack, to then spread and install across there building. As they were in the process of spreading, a gust of wind caught a spandrel panel, pushing it against the remaining trusses in the pack. Both the truss pack and spandrel panel fell into the work area, hitting Niall McCorma...CONTINUE...

Worker crushed at London Heathrow Airport

Worker crushed at London Heathrow Airport

The Health and Safety Executive (HSE) conducted an investigation after an employee of Dnata Ltd was crushed to death at London Heathrow Airport on the 23rd February 2022. The incident occurred during the unloading of baggage containers from an Emirates Airbus which had arrived from Dubai. The employee walked underneath a high loader (a raised platform similar to a scissor lift) in order to access the other side of a trailer. At the same time the high-loader operator lowered one of its tw...CONTINUE...

Why you should complete daily forklift inspections

Why you should complete daily forklift inspections

Forklift truck inspections can increase productivity by up to 25%. Additionally it will reduce breakdowns by 70% and lowers forklift truck maintenance costs by 25%. Depending on the type of forklift truck, costs and technical sophistication, a broad spectrum of maintenance strategies should be applied. A faulty forklift truck may significantly slow or completely halt your entire production process. Poor maintenance strategies can reduce the overall productive capacity of a warehouse by 5...CONTINUE...

Tragedy at Go-Kart Centre

Tragedy at Go-Kart Centre

Capital Karts in Barking, East London has been fined almost £120,000 after an incident on the 6th August 2021. Newham youth group organised a fun filled day at Capital Karts with a group of teens, however the day turned to horror when one of the teens had to be resuscitated at the venue after her hijab (a traditional muslim headscarf) got caught in a go karts drive axle. Ruwaida Adan, 15, died in hospital of hypoxic brain injury and asphyxiation four days after she visited Capital ...CONTINUE...

Banksman loses leg in MEWP accident

Banksman loses leg in MEWP accident

A food manufacturing company has been fined following a serious incident at its premises in Wirral. Sharon Bramhall had been supervising four members of staff as they completed high-level cleaning tasks during a night shift on the 22nd April 2022. She had been acting as a "banksman" as the MEWP turned at a right angle into the warehouse and struck Sharon, crushing her left leg. The 58-year-old had to have her left leg amputated below the knee following a incident at Baker & Baker Products ...CONTINUE...

The easter bunny uses TakeAIM

The easter bunny uses TakeAIM

TakeAIM are proud to announce that the easter bunny has begun using TakeAIM. Santa Claus contacted the easter bunny after they had success in the north pole using TakeAIM. Santa's team used the system to assess toy quality and inspect Santas sleigh prior to flight. Santa encouraged the Easter Bunny to try TakeAIM and we can now confirm they are using it in the run up to Easter. The easter bunny is able to assess, inspect and manage their eggs with TakeAIM! They're able to check th...CONTINUE...