Overhead cranes must be thoroughly examined at least every twelve months to comply with LOLER. It is important however not to rely solely on the annual LOLER inspection; companies should also complete regular visual checks throughout the intervening period and that is where the Good to Go Safety system comes into its own. Around a quarter of all crane incidents involve a dropped load, an estimated 60% of which could be attributed to poor crane maintenance and 15% to the failure of wire ropes/cables. It allows workers to carry out pre-use checks and spot potential faults before they develop into a more serious and costly defect. These safety checklists are designed to help improve safety, reduce maintenance costs and ensure compliance with legal responsibilities.
A programme of pre-use checks, regular inspections and servicing schedules should be established in accordance with the manufacturers instructions and the risks associated with using an overhead crane. Operators should be encouraged to report defects or problems. Reported problems should be put right quickly, with the crane or associated attachment(s) taken out of service if safety critical.
Each kit comes in a sturdy highly visible box which is ideal for storing used checkbooks for management records. The kit contains 275 individual (one for each day - working week) Overhead Crane inspections relating to the components and functionality of a Overhead Crane. Duplicate carbon copies of the completed inspection checklists are retained in the book for management records. The book also includes useful guidance notes to remind operatives what to look for during their Overhead Crane inspection. The kit also contains 2 status tags which when positioned and attached to the entrance of a Overhead Crane is a ideal way to advise employees when the equipment is "Good to Go" following a pre-use inspection. If a fault is found then the tag can display a "Do Not Use" message to quarantine the equipment until repaired and another inspection deems the Overhead Crane is safe for use. A useful wallet and pen which securely holds the book and pen to protect it from general wear and tear whilst providing a perfect writing surface whilst on the move. The kit also provides 300 tamper evident seals which provide a visual indicator that the checklist insert is in place and verified.
Daily Inspection Kit includes:
• 2 x Status Tags to attach to the equipment and show its status (includes a spare).
• 11 x Safety Check Books provide 275 individual checklists, allowing one to be completed each day of the year (based on a 5-day working week) and the findings displayed inside the status tag. Additional books can be ordered as and when required.
• 1x Check Book Wallet & Pen, to store the current book in use and provide a solid writing surface when completing checklists.
• 300 x Tamper Evident Seals, which can be used to deter and identify unauthorised access to the status tag.